Rimgard ONE

Rimgard ONE is a lockable lug nut that replaces one of the standard lug nuts. Unlike traditional locking lug nuts, Rimgard ONE has a two step design that uses a real key with up to 66,000 combinations and Rimgard's high security locking cylinder from ASSSA ABLOY.  High security locking cylinder Unique 66,000 combinatio

What is in your box

What is in your box

In your box you will find....... lay them out in the boot of your car to ensure a smooth and easy installation.

Grab your putty

This is the detailed description that will appear below the media.

Remove center cap

Remove center cap with butyl putty. Caution be careful not to ruin the protruding emblem.

Grab your retention ring

This is the detailed description that will appear below the media.

Insert retension ring

This is the detailed description that will appear below the video.

Grab your module

This is the detailed description that will appear below the video.

Install the module

Install the module with cut aligned towards the same lug.

Grab your adaptor and hex key

This is the detailed description that will appear below the media.

Tighten centre bolt

Engage the centre bolt and tighten firmly using adaptor and hex key. You should require at least 3 full turns.

Grab your cylinder lock

This is the detailed description that will appear below the media.

Insert the cylinder

Insert the cylinder lock with the key, turned to locked position and remove key.

Grab your centre cap

This is the detailed description that will appear below the media.

Re fit the center cap

Re fit the center cap. Snap your centre cap back onto the Rimgard lock.

Centre cap remover

This is the detailed description that will appear below the media.

Centre cap remover

Remove the centre cap by placing the remover in the cut and pushing it up.

Register your key

Welcome to step 1! Follow the instructions carefully.

This is the detailed description that will appear below the media.

Rimgard ONE is a lockable lug nut that replaces one of the standard lug nuts. Unlike traditional locking lug nuts, Rimgard ONE has a two step design that uses a real key with up to 66,000 combinations and Rimgard's high security locking cylinder from ASSSA ABLOY. 

  • High security locking cylinder
  • Unique 66,000 combinations key
  • Rotating cylinder house 
  • Extremely resistant to
    • Picking and manipulation
    • Drilling
  • Two-step design, torque/secure
  • Best customer ratings in the industry

The locks two-step design consists of a Rimgard hex-shaped wheel nut, that replaces one of the existing wheel nuts on the wheel. 

After tightening the Rimgard wheel nut to the hub, it is sealed with a rotating lock cylinder house, effectively preventing access to the lug and hence, the removal of the wheel.

C